1. Since my country's policy of reform, innovation and opening up, all aspects of Chinese society have been constantly changing with each passing day, especially for the construction industry, which is a booming previous economic development. Companies from all over the world have sprung up to build a new education and teaching building, and they are building higher and higher. In order to meet the requirements of the curtain wall aluminum veneer used in super high-rise buildings, structurally: one is that we cannot generate thermal stress; To meet the requirements of in-plane deformation of the veneer, in order to ensure the effectiveness of the anti-vibration design of the entire curtain wall aluminum veneer, the displacement problem of the curtain wall aluminum veneer must be able to meet the requirement of 25.5mm. Must be floating connection to structural frame.

2. The curtain wall aluminum veneer adopts side ribs and middle ribs in the assembly, welding, riveting or directly punching the material on the board to form the corner code, and a screw hole is fixed in the corner code to open a hole. The aluminum veneer and the frame must be structurally designed In order to float as a connection, the aluminum veneer and edge rib reinforcement should be set up. In order to ensure that the folded aluminum veneer does not produce stress that affects the assembly work, and to ensure the quality of the production and teaching of the aluminum veneer, the reinforcing ribs and the board surface are assembled. The stress caused by the gap and the environmental temperature difference can solve the problem of deformation of the board surface and ensure the flatness of the aluminum veneer of the overall building curtain wall of the enterprise.

3. The reinforcing bars of the aluminum veneer of the curtain wall should be floated. The connection and installation sequence is to use blind rivets or self-tapping screws of the side rib frame to fix the corner codes at both ends of the unreinforced middle rib, so that a gap is formed between the upper part of the middle rib and the pressure plate, and a gap is maintained between the end and the corner code.